Rain proof, moisture-proof and damage proof measur

2022-10-15
  • Detail

Rain proof, moisture-proof and damage proof measures for materials and tools at the construction site

in order to make the management of construction materials and tools more standardized and standardized, and promote the scientific management of site appearance and civilized construction on site, rain proof, moisture-proof and damage proof measures for materials and tools are formulated

storage of a lot of materials

1. Machine bricks shall be stacked in dice (200 pieces per dice), in rows, and the height shall not exceed 1.5m; Lightweight blocks such as aerated concrete blocks and hollow bricks shall be stacked and lined, and the stacking height shall not exceed 1.8m; Refractory bricks shall be covered with tarpaulin and shall not be affected by rain and moisture; All kinds of cement square bricks and flat tiles shall not be placed horizontally

2. Sand, stone, ash, ceramsite, etc. shall be stored in piles, and the site shall be flat without mixing; Colored stone slag should be padded and covered, and stored in different grades

II. Storage in the warehouse

1. The cement warehouse should have effective rain proof, water-proof and moisture-proof measures; The warehouse door is locked and managed by a specially assigned person; Stack neatly according to varieties and labels, no less than 100mm away from the wall, and it is strictly forbidden to lean against the wall. The bottom of the stack shall be padded overhead to keep ventilated and moisture-proof, and the stack height shall not exceed 10 bags; Bottom copy, first in, first out

2. Open storage: temporary open storage shall be provided with reliable covering and padding measures, and the cushion height shall not be less than 300mm, so as to be waterproof, rainproof, moisture-proof and windproof

3. Scattered ash storage: it is stored in a fixed container (scattered ash tank). If there is no fixed container, a closed special warehouse is set for storage, and reliable rain proof, waterproof, moisture-proof and other measures are provided

4. Bagged fly ash and white ash dust are stored in the shed, or no matter which kind of machine equipment is used, a series of inspection codes must be carried out before putting them together, and then the cover must be tight to prevent rain

III. doors and windows and wooden openings

1. Dry sites or warehouses that can prevent rain and sun should be selected for stacking. The inclination angle between the gantry and the ground should not be less than 70, and it should be overhead more than 200mm from the ground to prevent moisture, deformation and damage

2. Place them vertically according to the specification and model, stack them neatly, and do not plug or squeeze them. Hardware and accessories should be placed in the warehouse for safekeeping

3. When it is stored in the open air, it should be padded under and covered with tarpaulin. If it is found that there is paint peeling on the steel surface, it should be painted in time (touch up): aluminum alloy products are not allowed to damage the protective film to ensure that the package is intact

IV. steel and metal materials

1. They must be listed and stacked according to the regulations, variety, model and length, and the bottom skid shall not be less than 200mm

2. Non ferrous metals, steel sheets and small-diameter thin-walled pipes should be stored in warehouses or sheds, and should not be stored in the open air

3. Stack neatly, so that one end is in line. Wire rods should be in order; Finished products, semi-finished products and surplus materials shall be stacked separately and shall not be piled together

1. Stack in a dry, flat and solid site, with the pile foundation not less than 400mm and the pile height not more than 3m, so as to prevent corrosion and moisture

2. Stack one end at the same time according to the tree species, wood species, grade and specification, and leave a slope along the stack; The square crib is closely arranged, and the slope is reserved for capping, and the gap is reserved for the wood with large water content; Those with moisture content requirements shall be placed in the material warehouse or shed

3. When selecting the stacking point, keep away from the places where there are open flames (boilers, chimneys, kitchens, etc.) in the dangerous goods warehouse, and have signs prohibiting fireworks and fire-fighting equipment to prevent fires

4. The removed wood formwork and supporting materials shall be sorted and stacked at any time, and the formwork and supporting materials shall be stacked separately

1. Stack them in a dry and ventilated warehouse according to the variety, specification, grade and quantitative order. If they are temporarily stored in the open air, they must be covered under the mat. It is forbidden to put them together with damp and volatile substances (acid, alkali, salt, lime, grease, alcohol, etc.)

2. When stacking, the box cover shall be upward, and shall not be tilted or placed horizontally, and shall not bear heavy pressure or collision; Stack height: no more than 3 layers for 2~3mm thick and no more than 2 layers for 4~6mm thick; The bottom skid shall not be less than 10cm; Bulk glass shall be stored separately

3. Check the storage of glass frequently, and deal with wet, moldy and broken glass in time

4. During loading and transportation, the packing box should be upright, the box head should be forward, and the boxes should be close to each other. Shaking and collision should be avoided; Stand upright and handle with care during loading and unloading

VII. Hardware products

1. Quantitatively stack them in a dry and ventilated warehouse according to variety, specification, model, place of origin, material and tidy order

2. Keep the package intact during storage, and do not mix with chemical materials such as acid and alkali to prevent corrosion

3. The distribution shall be based on the principle of first in, first out. In case of rust, it shall be handled in time, and the screws and nuts shall be painted with antirust paint in time

VIII. Plumbing equipment

1. Neatly stack them according to the variety, specification and model, stagger and bite each other, invert the heavy code, and the height is not more than 1.5m. The radiator has a bottom skid, and the height is not more than 1m

2. For small caliber and threaded accessories, keep the package intact to prevent bumping against damp dust

IX. rubber and plastic products

1. They are neatly and quantitatively stacked in the warehouse according to variety, specification, model and ex factory date to prevent rain and sun. Jean Claude Steinmetz, chairman of China Europe Automotive Materials Committee (apimc), and Cao Du, executive chairman of ialta/Vice President of Chang'an Automotive Engineering Research Institute, presided over the launching ceremony of the selection of the ialta (China) automotive lightweight green technology innovation award, which is high temperature proof

122 silicone structural seal for building 2. It is strictly forbidden to contact with acids, alkalis, Oils and chemicals to prevent corrosion and aging

3. The storage is to keep the package intact, grasp the principle of first in, first out, and prevent deformation and aging

X. paint, coating and chemical materials

1. According to the variety and specification, store in a dry, ventilated and cool warehouse, strictly isolate from the fire source and power supply, and keep the temperature between 5~30 C

2. Keep the package intact and sealed, and the stacking position should be stable and firm to prevent tilting and collision; First in first use, strictly control the storage period; The paint shall be inverted once a month to prevent sedimentation

3. Formulate strict fire, water and gas prevention measures, and set up special warehouses for highly toxic and dangerous goods (calcium carbide, oxygen, etc.) with obvious signs

Xi. Waterproof materials

1. The bottom of asphalt material should be solid and flat, and isolated from the natural ground. It is strictly prohibited to mix with other large piles of materials

2. Ordinary linoleum shall be stored in the warehouse or material shed, and shall be placed vertically. The stacking height shall not exceed 2 layers. It is forbidden to stack horizontally or obliquely. When the glass cloth felt is placed horizontally, the stacking height shall not exceed 3 layers

3. Other waterproof materials shall be subject to the storage requirements of paint chemical materials

XII. Other light decoration materials should be stored

1. They should be stacked neatly by classification, with the bottom pad not less than 100mm, and the height of layered stacking should not exceed 1.8m

2. Waterproof and windproof measures shall be taken to enclose and cover; Gypsum products shall be stored in warehouses or sheds and stacked vertically

XIII. Materials transfer tools in the paper packaging industry

1. Dismantle, adjust and maintain them at the same time, and stack them neatly

2. Buckle the combined steel formwork (or buckle the top layer); The large formwork shall be erected on the opposite side, and the self stabilizing angle shall be controlled between 17 and 18; Steel scaffold tubes shall be equipped with bottom pads, which shall be classified according to the length and stacked at one end; Steel supports and steel springboards shall be stacked upside down in layers, and the height shall not exceed 1.8m; All kinds of fasteners and accessories shall be stacked in a centralized manner, and fences shall be set

3. Steel and iron materials shall be padded and covered to prevent corrosion and damage caused by rain and moisture

according to the management requirements of on-site materials and tools, combined with the actual situation of the site, implement the division of labor responsibility system, daily inspection and regular inspection system, and rectify problems in time to ensure that the management of on-site materials and tools meets the standard. Reduce human and natural consumption and reduce production costs. We should really increase production and save money, increase efficiency and save expenses

Copyright © 2011 JIN SHI