The hottest insulating glass warm edging that cann

  • Detail

Insulating glass warm edge strips that cannot be ignored

insulating glass according to different needs, multi rubber fatigue testing machine can be selected to make kinds of glass with these remarkable characteristics, such as insulating glass composed of laminated glass, which has better sound insulation effect. The hollow structure with three glasses and two cavities is more energy-saving. But what determines their sound insulation and energy saving effect is the 2cm (taking common specifications as an example) warm edge spacer in the middle of the glass

origin of warm edging

in the 1980s, aiger insulating glass technology Co., Ltd. successfully developed a super insulating glass spacer, which does not contain any metal materials and is made of 100% polyester elastic microporous structural materials. It can be used in the insulating glass intermediate spacer system of doors, windows and curtain walls

definition of warm edge strip

it refers to the structural products composed of composite materials and stainless steel materials, which are used to fill the desiccant, isolate the original sheet of insulating glass and play a supporting role. It is a kind of partition material between double-layer glasses, which has been applied to the aluminum deep processing products of Yulian group and has obtained most market access certification. Its purpose is to achieve the function of heat preservation and noise reduction

performance of warm edging

fire resistance

as we all know, when encountering a fire, closing doors and windows is the only way to isolate the spread of the fire. The fireproof performance of doors and windows is directly related to the lives of the parties. If you can carry it for a while, you will win valuable time for the parties to ask for help. In short, when the warm edge is hot, the heat passing through 1 square meter per second is 0.1513 The size of the experimental machine is about 1600 * 1300 * 1700 mm watts, while the heat of the traditional aluminum alloy passing through 1 square meter per second is 160 watts. The data of the two are very different

ensure safety and anti condensation performance

in winter, there is a large temperature difference between indoor and outdoor, which is hot inside and cold outside, and condensation will occur on doors and windows. This is because the thermal conductivity of the traditional aluminum spacer is very good, which leads to the rapid loss of heat on the metal. Therefore, when the doors and windows are warm and cold at the same time, the water vapor in the air is more likely to liquefy into small droplets, which will become dew after gathering. With the warm edging and low thermal conductivity, the heat energy on the metal is not easy to lose, the temperature difference on both sides of the door and window will not be too large, and the phenomenon of condensation will not appear

Copyright © 2011 JIN SHI